Rust Shield Clear Lacquer | 400ml

€12,99 EUR Sale Save
  • Ultimate protection against rust and corrosion
  • Leaves an impermeable, weatherproof barrier
  • Prevents the reappearance of rust - ideal for interior & exterior use
  • Clear, flexible glossy finish, highly resistant to cracking & crazing
  • Perfect after-treatment for our rust remover range
  • Made in Britain

 

Jenolite Rust Shield Aerosol leaves a clear flexible glossy finish, with fantastic resistance to rust and corrosion. It provides the perfect after-treatment for our rust remover range. Highly resistant to cracking it forms an impermeable, weather proof, barrier that helps to prevent the reappearance of rust. It is also rated to resists temperatures of up to 180°C. Suitable for use on all metals. (Not suitable for painting over)

• Consult the safety data sheet prior to use.

• Shake can well before use.

• Clean target surface, ensure it is clear of dirt, oil and contaminants.

• Mask off any areas that are not to be sprayed.

• For best results test spray a flat surface (cardboard box or similar) to become familiar with the

spray before using for the chosen application.

• Spray on to the target surface in smooth strokes from 15-30cm away.

• Spray in light coats, building up if required, leaving 15-30 minutes between coats.

• Leave to dry for 24 hours before using.

• This Aerosol should be stored out of direct sunlight and below 50°C.

• Guaranteed for use up to 1 year after manufacture.

• We recommend testing an inconspicuous area before use, to ensure the desired effect is achieved.

• For best results use between 10˚C and 25˚C. Extremes of temperature affect drying performance.

Physical Properties

• Appearance: Clear.

• Base Type: Acrylic polymer in solvent.

• Propellant: Propane/Butane mix.

• Flammability: Extremely flammable. Flash point -60°C.

• Creates a clear acrylic coating that may change the appearance of some surfaces.

Please Note

This technical data sheet is for general guidance purposes only and may contain information that is

inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are

made without guarantee. Further information is available from our Technical Department.